Use Metal Studs If You're Looking For A Long Straight Interior Wall
The video discusses how to build a long, non-bearing partition wall using metal studs and covers the benefits of using metal studs, such as their straightness and resistance to warping, as well as the steps involved in building the wall.
Here are some of the key points discussed in the video:
Benefits of metal studs: Metal studs are a good choice for building long, non-bearing partition walls because they are straight and do not warp over time. This is especially important if the wall will be used to support heavy objects or if it will be visible.
Consider using thicker metal studs for stronger walls and using 5/8 inch drywall instead of half-inch drywall for added strength.
Plan the location of the wall carefully. The wall should be located in a place where it will not interfere with any existing structures or utilities.
Use a level to make sure the wall is straight. It is important to use a level to make sure that the wall is plumb and level.
Secure the wall to the framing. The wall should be securely attached to the framing of the building.
The wall can be finished in a variety of ways, such as painting, wallpapering, or tiling.
Bonus Tips:
Consider using soundproofing materials. If the wall will be located between two rooms, you may want to consider using soundproofing materials to reduce noise transmission.
If you will be using the wall to support shelves or other furniture, you may want to add electrical outlets to the wall.
Get permits. If you are making significant changes to your home, you may need to obtain permits from your local building department.
I hope these tips help you build a long, non-bearing partition wall using metal studs.
